Skip to content
PARUKH CONSTRUCTION
Two yellow road rollers on freshly laid, deep black asphalt beside green trees

Asphalt sealcoating in Charlotte, NC

A protective coat that keeps sun, water and oil out of your asphalt, and brings back that deep black look.

First coat
6–12 mo. after paving
Reseal
Every 2–3 yrs
Cure
24–48 hrs

What sealcoating covers

Sealcoating is a protective coating applied over asphalt. It slows the damage from UV, rain and spilled oil and gas, and restores the dark finish that fades to grey over time. Parukh Construction cleans the surface, fills cracks, then applies sealer to driveways and parking lots across Charlotte.

Right for you if you have

  • Driveways that have faded from black to grey
  • Asphalt that is a few years old and still in good shape
  • Parking lots due for maintenance before cracks spread
  • New driveways ready for their first protective coat

What's included

  • Cleaning the surface so sealer bonds properly
  • Crack filling before sealing, where needed
  • Oil and gas stains treated
  • Even application across the whole surface
  • Barricades and clear instructions while it cures

What changes the price

Prices aren't published because no two jobs are the same size or shape. You get a free written estimate after we've seen the job, before any work starts. These are the things that move the number:

Factors that affect the price of sealcoating
01Total square footage
02How many cracks need filling first
03Surface condition and how much cleaning it needs
04Number of coats

How the job runs

  1. Step 1

    Clean

    Dirt, debris and loose material cleared off the surface.

  2. Step 2

    Fill

    Cracks filled so water can't sneak under the new coat.

  3. Step 3

    Seal

    Sealer applied evenly, edge to edge.

  4. Step 4

    Cure

    Keep off for about a day. We'll tell you when it's ready.

Two yellow road rollers on freshly laid, deep black asphalt beside green trees

The detail, if you want it

Why asphalt needs sealing

Asphalt is held together by a binder that dries out and oxidises in the sun. As it does, the surface turns grey, gets brittle and starts to crack. Sealcoating puts a protective layer on top, so the sun, water and car fluids hit the sealer instead of the asphalt itself.

When to seal a new driveway

Fresh asphalt needs time to cure before it's sealed, usually somewhere between six months and a year. Sealing too early can trap oils that need to escape. After the first coat, most driveways do well with a reseal every two to three years.

Weather and timing in Charlotte

Sealer needs dry weather and warm temperatures to cure properly, so most sealing happens from spring through fall. A dry forecast for the day of the job and the day after is the main thing to plan around.

GuideWhen should you sealcoat a new asphalt driveway?

Sealcoating: common questions

How often should I sealcoat my asphalt driveway?

Most driveways should be resealed every two to three years. Parking lots with heavy traffic may need it more often. Sealing too often can build up layers that flake, so more is not always better.

How long after sealcoating can I drive on it?

Plan for about 24 to 48 hours off the driveway, depending on temperature and humidity. Foot traffic is usually fine sooner. We'll give you the exact window on the day.

Does sealcoating fix cracks?

No. Sealer protects the surface but does not fill cracks on its own. That's why cracks are filled first, as part of the job, before the sealer goes down.

Free sealcoating estimate

Tell us a little about the job.

What do you need? (pick any)

Or call (704) 293-7661, Mon to Fri, 8am to 5pm.

If you don't call us, it's your own asphalt.

Free estimates on driveways, parking lots, sealcoating, repairs, crack filling and line striping across Charlotte. Mon to Fri, 8am to 5pm.

Call nowFree estimate